Media Library / Images

ZVA Slimline 2

Automatic nozzle DN 19, for flowrate max. 80 l / min.

L.P. Gas rail tanker

loading and unloading with DGC Dry Gas Couplings, LPG hose assemblies. Vehicle side: DGC-V male couplings with flange

Construction of Elaflex composite hoses type FWS

Sectioned view of a composite hose, denomination of the components (German)

SG-COAX_Al

Sight Glass, to EN 13617-1, for ZVA Slimline 2 GR with vapour recovery. Installation between petrol station nozzle and hose assembly, or mounting on the dispenser. For the visual control of bubble-free dispensing and fuel colour (e. g. for premium fuels). Suitable for all standardised fuels.

MannTek Dry Disconnect Couplings:

DDC-V 50-2", DDC-V 50 F, DDC-M 50-2", DDC-M 80-3"

ContiTech Production hose

handling coil / logistics

Elaflex Hamburg

Hose stock, reeling up a FEP hose

Elaflex Hamburg

Stock commisioning system

Oasis manifold, ball valves - Biogas

DDC-V 25 Al; DDC-K 25

Dry Disconnect Coupling as probe/sampling unit connection at aircraft refueller

ZVG 2 EURO

(Push-In-Coupling) to EN 13760. One-handed operation possible.

GasGuard nozzle GG 1 DN, hose assembly, nozzle boot NB-GG

Slimline hose assembly, section view

ZV 500 for chemials

Bulk filling of Methylene Chloride

Elaflon Plus FEP 25

Universal hose ELAFLON PLUS FEP with seamless FEP lining, resistant to all commonly used chemicals, see resistance chart. Suitable for both suction and delivery (Type FEP D = delivery only). W.P. up to 16 bar, burst pressure > 64 bar. Temperature range from - 30° C up to + 100° C, briefly up to 130° C. Steaming out for cleaning and sterilisation permissible up to 150° C, max. 30 min (open system). Meets EN 12115.

Terminal loadingarm

'SBC-C'

HD 32 C

Yellow Band' aircraft refuelling hose, suitable for all aviation gasolines and jet fuels (JET A 1), deicing fluids and motor oils. Temperature range - 30° up to + 90° Celsius. Electrical resistance between 1,000 and 1 million Ohm.

MannTek DGC DryGasCouplings for L.P. Gas

DGC-M 50-2" with DDC-S dust plug

Hosebun® hose saddle 'HSB'

provides for a professional and material-protecting suspension of hose assemblies

SPANNFIX pinned safety clamps of aluminium

SX 50 NR Al

Oasis FV103 180° Fill Valve for CNG

ZVG 2 ACME nozzle for L.P. Gas / Autogas, LPG 16 hose assembly, ARK 19 Safety Break

SBC-C 150.16

MannTek Safety Breakaway Coupling with cable release, PN 16 flange connection

Elaflex Hamburg

ERV pressure testing

GasGuard LPG nozzle GG20DN

With long connector nut to access 'hard to reach' fill points. "DN": suited for use by the general public and untrained personell (self service). Patented dual nose piece for added safety. Low lever actuation force. Gas release volume on valve closure : 1,7 cm³.

FHD 50 special type HIFR

(helicopter in flight refuelling)

RMC 25 SS

Hose coupling with male foodstuff thread and Spannloc clamps

ERV-R 50.16 ZS 2

Red Band Rubber Expansion Joint with "ZS" limiter (tie rods with outer limitation in rubber bushings)

TSVX 50

Hose connectors with double shank of hot stamped brass, with Spannfix safety clamps of hot stamped aluminium.

DDC-M 25-1" SS

MannTek Dry Disconnect Coupling, DN 25, stainless steel